When you mount a roll-up commercial door in your retail property or warehouse, you expect it to work efficiently without interruptions. To prevent these issues, you need to choose the best quality product and install it well. As you install the roll-up door, you need to adhere to installation instructions given by the manufacturer. You can still do a proper installation, and these issues will still surface over time. Here you will get the best tips on how you can troubleshoot these common issues.
Common problems that affect roll-up commercial doors
One or more issues can make your commercial roll up door parts difficult to close or open. Here is a list of the common issues that can make the door behave this way.
Poor leveling whole installing the door
You need to use leveling tools while installing the door to make sure the alignment is correct for easy operation. Some people prefer eyeball in the installation to see the actual level. It’s a process that creates avenues for mistakes.
Incorrect alignment of the header
If you place a header far in Front or behind, the track can’t fall in the guides in correct arcs to enhance smooth operations. It can make the door drag on the guides or push the wall.
Door spring overturning
The manufacturer’s guidelines for tensioning door springs are very vital. Over tensioning the spring by the turning door past the manufacturer’s recommendations can break the spring. The incorrect tension makes the door hard to control.
Tight guides
When the guide strips are tight, the door panel drags against the guides making it hard to close or open the door. The door will scratch off your paint and damage your door sheet with time.
Misaligned drum
Some of the old door designs need lining up huge pieces of metals on drum edges to make the barrel in the installation process. If you, do it wrong, your door won’t line up well, and it will roll crook your door. To escape this, you need to buy doors with corrugated drums such as those offered by DBCI. The corrugated design sheet attached to the corrugated drum forms a perfect barrel when it wraps. It’s a process that eliminates user errors in the installation time to enhance perfect door alignment.
Damaged door sheet
The common problem most commercial clients experience is damaging the sheet panels with time. For doors that use chain stop, you need a forklift or tractor to open the door. It’s a situation that can make the door bang on the ground or into the head stop. With time, it will lead to damage to the door and its parts. Chances are also high for the commercial machinery in a warehouse to scratch or dent doors during normal business operational hours.
Conclusion
To prevent these problems, you ne3ed to operate your commercial roll-up door with care. Encourage your employees to be keen when operating machinery around the doors to limit damages. If you observe these precautionary measures, your doors will serve you longer than usual.
